A hybrid wired and wireless control panel, 4 wired loops, 16 wireless zones, 2 sections, 4 outputs, 15 user codes, a 127 event memory, security level 2 according to EN 50131, 230V AC, 500 mA power source, space for a backup battery

In the plastic box of the JA-63 there is a power supply and space for the backup battery with a capacity of 1.3 or 2.6 Ah.

The JA-63 motherboard are four input terminals for wire loops (with the option of single or double balancing). If the control panel is equipped with a radio module (JA-63KR), it has 16 wireless zones for JA-60 series detectors (2 detectors can be enrolled to each zone). You can also use up to 8 wireless keypads or remote controls, JA-60A wireless sirens and UC-2XX wireless output modules. To extend the system's control panel, it can be enrolled to another JA-6x sub-type wireless control panel. This superior system acquires information about events from the slave sub-panel control panel.

When fully configured (installation of all modules) you can have a 16 zone 4 loop wireless + wired system. The control panel can be divided into two user-programmable independent sections with shared parts (split mode control panel).

The panel can be fitted with two types of communicators:

• The JA-65X communicator transmits voice messages, SMS messages through an SMS server, communicates with ARCs and allows remote access from an installer's or user's PC (using ComLink SW and a JA-60U).
• The JA-60GSM communicator sends SMS messages, calls predefined numbers and plays audible warnings, communicates with two ARCs, allows remote access from a phone keypad and settings via a web site. Allows for telephone connection to the building, as well as sending and receiving SMSes, and Internet access. You can also control two devices in the building - such as heating and air conditioning.

Awards

The JA-63 PROFI alarm system has won the following awards:
SecuTech Innovations Award 2004	Golden Plaque Coneco 2004

Specifications